How to Use ClO₂

How To Use ClO₂?

Chlorine Dioxide can be activated and safely used as either a ‘GAS VAPOR’ to deeply penetrate and disinfect a confined space, its atmosphere and its porous and non-porous surfaces, or activated as a ‘LIQUID’ to be applied by sponge, mop, wet vacuum, sprayer or fogger onto virtually any surface or atmosphere to eliminate wide-spectrum contamination and resistant odor.

NO OTHER CHEMICAL SUBSTANCE HAS THIS CAPABILITY.

Step 1

Odor Source Identification, Removal & Restoration

Source issues must be addressed or mold & odor will re-appear.

If removing mold, use a standard Home Depot-type mold test.

Test in affected areas and for the outside environment to establish baselines.

HEPA Filtration (if required):

*HEPA vacuums and air purifiers remove 99.99% of airborne particles measuring 0.3 microns in diameter.

FOR BEST RESULTS, USE BOTH ClO₂ LIQUID SURFACE & VAPOR PROTOCOLS.

Step 2

Liquid Surface Application

All rooms, beddings, surfaces, furniture, uniforms, etc.

Sprayers, Foggers, Mops, Sponges and Wet Vacuums are used for different targeted application challenges.

Step 3

Vapor Application

ClO₂ sanitizes, disinfects and deodorizes atmospheres and its visible and non-visible surfaces and penetrates barriers spraying and fogging can not.

The Standard Global Vaporing Treatment period is 3 hours to 24 hours depending on the severity of the issues.

Step 4

Clean up and Retest

Re-open and air-out space if using Vapor protocol.

Pour remaining Vapor concentrate down the toilet or drain.

Re-take mold tests in same locations to determine treatment effectiveness.

Interested in joining our team?

Become a Reset ClO₂ Distributor. Reset owes much of its growth to developing long term, mutually profitable business relationships with its distributors. (Note: links to the Reset Chlorine Dioxide distributor site.)